I.
Workholding
A.
Intro to Workholding
B.
Supporting and Locating Principle
C.
Locating Devices
D.
Clamping Basics
E.
Chucks, Collets, and Vises
F.
Fixture Body Construction
G.
Fixture Design Basics
H.
Drill Bushing Selection
II.
Applied
Mathematics
A.
Math Fundamental
B.
Math: Fractions and Decimals
C.
Units of Measurement
D.
Basics of Tolerance
E.
Blueprint Reading
F.
Interpreting Blueprints
G.
Geometry: Lines and Angles
H.
Geometry: Triangles
I.
Geometry: Circles and Polygons
J.
Trigonometry: The Pythagorean
Theorem
K.
Trigonometry: Sine, Cosine, Tangent
L.
Statistics
III.
Inspection
A.
Basic Measurement
B.
Calibration Fundamentals
C.
Hole Standards and Inspection
D.
Thread Standards and Inspection
E.
Surface Texture and Inspection
F.
Introduction to GD&T
G.
Major Rules of GD&T
H.
Inspecting a Prismatic Part
I.
Inspecting a Cylindrical Part
J.
Advanced Hole Inspection
K.
Inspecting with Optical Comparators
L.
Inspecting with CMM
M.
Calibration and Documentation
N.
In-Line Inspection Applications
IV.
Safety
A.
Intro to OSHA
B.
Personal Protective Equipment
C.
Noise Reduction and Hearing
Conservation
D.
Respiratory Safety
E.
Lockout/Tagout Procedures
F.
SDS and Hazard Communication
G.
Bloodborne Pathogens
H.
Walking and Working Surfaces
I.
Fire Safety and Prevention
J.
Flammable/Combustible Liquids
K.
Ergonomics
L.
Hand and Power Tool Safety
M.
Safety for Lifting Devices
N.
Powered Industrial Truck Safety
O.
Confined Spaces
P.
Environmental Safety Hazards
Q.
Machine Guarding
V.
Materials
A.
Hardness Testing
VI.
Quality/Lean
A.
Lean Manufacturing Overview
B.
ISO 9001: 2015 Review
C.
Approaches to Maintenance
D.
Total Productive Maintenance
E.
5S Overview
F.
Intro to Six Sigma
G.
Troubleshooting
H.
Conducting Kaizen Events
I.
SPC Overview
J.
TS 16949:2009 Overview
K.
Metrics for Lean
L.
Process Flow Charting
M.
Strategies for Setup Reduction
N.
Six Sigma Goals and Tools
O.
Continuous Process Improvement:
Managing Flow
P.
Continuous Process Improvement:
Identifying and Eliminating Waste
Q.
Management Tools: Problem Solving
R.
Manufacturing Process Applications:
Part I
S.
Manufacturing Process Applications:
Part II
T.
Quality and Customer Service
VII.
Metal
Cutting
A.
Safety for Metal Cutting
B.
Cutting Processes
C.
Overview of Machine Tools
D.
Basic Cutting Theory
E.
Band Saw Operation
F.
Introduction to Metal Cutting Fluids
G.
Metal Cutting Fluid Safety
H.
Toolholders for Turning
I.
Speed and Feed for the Lathe
J.
Speed and Feed for the Mill
K.
Cutting Tool Materials
L.
Carbide Grade Selection
M.
ANSI Insert Selection
N.
Lathe Tool Geometry
O.
Mill Tool Geometry
P.
Drill Tool Geometry
Q.
Optimizing Tool Life and Process
R.
Impact of Workpiece Materials
VIII.
Manual
Machining
A.
Manual Mill Basics
B.
Engine Lathe Basics
C.
Manual Mill Setup
D.
Overview of Engine Lathe Setup
E.
Benchwork and Layout Operations
F.
Manual Mill Operation
G.
Engine Lathe Operation
H.
Threading on the Engine Lathe
I.
Taper Turning on the Engine Lathe
J.
Holemaking on the Manual Mill
IX.
Hydraulics
& Pneumatics
A.
The Forces of Fluid Power
B.
Safety for Hydraulics and Pneumatics
C.
Introduction to Hydraulic Components
D.
Introduction to Pneumatic Components
E.
Hydraulic Control Valves
F.
Introduction to Fluid Conductors
G.
Fittings for Fluid Systems
H.
Hydraulic Power Sources
I.
Pneumatic Power Variables
J.
Pneumatic Power Sources
K.
Introduction to Fluid Systems
L.
Preventive Maintenance for Fluid
Systems
M.
Hydraulic Power Variables
N.
Fluid System Print Reading
O.
Pneumatic Control Valves
P.
Actuator Applications
Q.
Basic Hydraulic Circuit Design
R.
Basic Pneumatic Circuit Design
S.
Hydraulic Fluid Selection
T.
Contamination and Filter Selection
U.
Hydraulic Principles and System
Design
X.
CNC
A.
Basics of the CNC Lathe
B.
Basics of the CNC Mill
XI.
Grinding
A.
Grinding Processes
B.
Grinding Safety
C.
Basic Grinding Theory
D.
Basics of the Surface Grinder
E.
Basics of the Cylindrical Grinder
F.
Basics of the Centerless Grinder
G.
Setup for the Surface Grinder
H.
Setup for the Cylindrical Grinder
I.
Setup for the Centerless Grinder
J.
Surface Grinder Operation
K.
Cylindrical Grinder Operation
L.
Centerless Grinder Operation
M.
Introduction to Grinding Fluids
N.
Grinding Variables
O.
Grinding Nonferrous Metals
P.
Grinding Wheel Materials
Q.
Grinding Wheel Geometry
R.
Dressing and Truing
S.
Grinding Wheel Selection
XII.
Electrical
Systems
A.
Electrical Units
B.
Safety for Electrical Work
C.
Introduction to Circuits
D.
Introduction to Magnetism
E.
DC Circuit Components
F.
NEC Overview
G.
AC Fundamentals
H.
Electrical Instruments
I.
Electrical Print Reading
J.
DC Power Sources
K.
AC Power Sources
L.
Conductor Selection
M.
Series Circuit Calculations
N.
Parallel Circuit Calculations
O.
Battery Selection 321
XIII.
PLCs
A.
Basics of Siemens PLCs
B.
Siemens PLC Hardware
C.
Siemens PLC Inputs and Outputs
D.
Siemens Human Machine Interfaces
E.
Siemens SIMATIC Modular PLCs
F.
Siemens SIMATIC S7-1200 PLCs
G.
Siemens SIMATIC S7-1500 PLCs
H.
Siemens Safety Integrated for
Factory Automation
I.
Intro to PLCs
J.
Hardware for PLCs
K.
PLC Inputs and Outputs
L.
Hand-Held Programmers of PLCs
M.
Overview of PLC Registers
XIV.
Mechanical
Systems
A.
Introduction to Mechanical Systems
B.
Safety for Mechanical Work
C.
Forces of Machines
D.
Bearing Applications
E.
Belt Drive Applications
F.
Gear Applications
G.
Power Transmission Components
H.
Lubricant Fundamentals
I.
Mechanical Power Variables
J.
Spring Applications
K.
Gear Geometry
L.
Clutch and Brake Applications
XV.
Robotics
A.
Robot Troubleshooting
B.
Robot Maintenance
C.
Robot Installations
XVI.
Rigging
A.
Introduction to Machine Rigging
B.
Rigging Equipment
C.
Lifting and Moving Equipment
D.
Rigging Inspection and Safety
E.
Rigging Mechanics
XVII.
Welding
A.
Welding Safety Essentials
B.
PPE for Welding
C.
Welding Fumes and Gases Safety
D.
Electrical Safety for Welding
E.
Introduction to Welding
F.
Introduction to Welding Processes
G.
Math Fundamentals for Welding
H.
Geometry Fundamentals for Welding
I.
Material Tests for Welding
J.
Welding Ferrous Metals
K.
Welding Nonferrous Metals
L.
Overview of Weld Types
M.
Overview of Weld Defects
N.
Welding Symbols and Codes
O.
Electrical Power for Arc Welding
P.
Introduction to SMAW
Q.
Introduction to GMAW
R.
Introduction to FCAW
S.
Introduction to GTAW
T.
Fabrication Process
U.
Overview of Soldering
V.
Thermal Cutting Overview
W.
Plasma Cutting
X.
Oxyfuel Cutting Applications
Y.
Introduction to Automation
Z.
SMAW Applications
AA.
GMAW Applications
BB.
Advanced GMAW Applications
CC.
FCAW Applications
DD.
GTAW Applications
XVIII. Fasteners
A.
Intro to Fastener Threads
B.
Overview of Threaded Fasteners
C.
Tools for Threaded Fasteners
D.
Overview of Non-Threaded Fasteners
E.
Intro to Fastener Ergonomics
F.
Properties for Fasteners
G.
Understanding Torque
H.
Threaded Fastener Selection
XIX.
Motor
Controls
A.
Relays, Contactors, and Motor
Starters
B.
Introduction to Electric Motors
C.
Symbols and Diagrams for Motors
D.
Logic and Line Diagrams
E.
Distribution Systems
F.
Limit Switches and Proximity Sensors
XX.
Leadership
A.
Essentials of Leadership
B.
Essentials of Communication
C.
Managing Performance: Best Practices
D.
Managing Performance: Corrective
Actions
E.
Conflict Resolution Principles
F.
Conflict Resolution for Different
Groups
G.
Team Leadership
H.
Managing the Diverse Workplace
I.
Harassment and Discrimination
J.
Performance Management and the Law
K.
Manufacturing Management
L.
Personal Effectiveness
1. Can I register for
programs if I am an international student?
Yes, because ed2go programs are online you never
have to
actually travel to the school. Most
schools offer telephone or online registration.
2. How long does it
take to complete a program?
All of our programs are self-paced and open
enrollment, so
you can start them when you want and finish them at your own pace. When you register, you’ll receive eighteen
(18) months to complete the program.
3. What if I don't
have enough time to complete my program within the time frame provided?
The time allotted to complete your program has
been
calculated based on the number of hours for each program, so don't
worry too
much about not completing in time. If, after a concerted effort, you
are still
unable to complete, your Student Advisor will help you work out a
suitable
completion date. Please note that a fee may be charged for an extension.
4. Do I have to buy
additional materials?
No.
5. Can I get
financial assistance?
ed2go courses are non-credit courses, so they do
not qualify
for federal aid. In some states,
vocational rehab or workforce development boards will pay for qualified
students
to take our courses. Additionally, some
students may qualify for financial assistance when they enroll, if they
meet
certain requirements.
6. What happens when
I complete the program?
Upon successful completion of the program, you
will be
awarded a certificate of completion.
7. Am I guaranteed a
job?
ed2go programs will provide you with the skills
you need to
obtain an entry-level position in most cases.
We don’t provide direct job placement services, but our
facilitators and
career counselors will help you build your resume and are available to
give
advice on finding your first job.
Facilitators will also be available to use as a professional
reference
upon completion of the program.
Potential students should always do research on the job market
in their
area before registering.
8. Who will be my
instructor?
There is no facilitator for this program. Support
is offered
through email, online forms, and phone.
9. What software or
hardware do I need in order to take online programs and what are the
system
requirements?
In order to take our online programs, you must
have access
to a computer and the Internet. You can
access the program contents from any Web-enabled computer.
You don’t have to use the same computer to
log-in to the program every time. Make sure your web browser is updated.
10. Can I use a Mac?
Yes – but some interactive elements using Adobe
Flash are
not supported.
11. How can I get
more information about this program?
If you have questions that are not answered on our
website,
please feel free to contact us via LIVE chat (click the button above). If you are visiting us during non-business
hours, please feel free to send us a question using the “Contact Us”
form to
the right. You may also call us at
1-877-221-5151. We will answer your
questions promptly.
12. When can I start
the program?
Our programs are all open enrollment.
You can register and start the program as
soon as you are ready.
Please note: Once the
program curriculum is accessed online or through submission of a
material
shipment confirmation, refunds cannot be issued.
13. Does this program
prepare for a certification?
There is not a certification. This program is
knowledge based.